The Lance J. Technoweb

I happened upon a set of Coax to Ethernet adapters and I decided to do an analysis of them. The adapters I found, by Commscope, use the G.hn protocol.  This protocol is used for many media types, with the general idea that existing or legacy cabling can be repurposed for modern home networking. I have some existing idle Coax in the walls and ceiling of my house, so I decided to try these adapters with this legacy copper.  Testing The home coax run I decided to try is a bit more than 10 meters long. I set up two PC clients on my network, with one PC being attached to one of these adapters, which was then attached to the 10 meter long cable. At the far end I attached the other adapter, which was then attached to my primary Ethernet switch.   The coax cable was in three distinct segments, 1 meter + 10 meters + 0.5 meters, all joined together with F-style couplers.   Network tested via iPerf   Results I successfully ran four trials of iPerf3 between my two PCs,...

2001 was the year when the largest percentage of US households were subscribing to Cable TV service (71%).  Since then, the CATV subscriber percentage has fallen... and precipitously. Peak Cable wasn't in 2015.  It wasn't in 2008.  It was in 2001! What is worse, by 2023 the households subscriber number had fallen to 34.7%.  That's right, half off its high water mark.  And is has continued to plummet since then. Why have so many people left cable TV? No doubt Cable TV's continued sky-high pricing convinced a lot of people to cut the cord and instead go to streaming services.  High base prices, ever-rising special fees, unavoidable rental costs, and scam-oriented "discount bundles" have all conspired to make the typical Cable TV bill run well over $100 each and every month. The Cable TV value proposition simply failed. So what's next for Cable TV?  I suspect no resurgence and a continued slow decay.  The people who are still on Cable TV simply don't...

I've had a traditional UPS powering my network rack for a few years now, but it isn't all that efficient because it sends DC battery power to an internal AC Inverter so that it can power gear, and that gear goes around and converts it back to DC.  It seems reasonable to skip this lossy process.  Here's how I did it. Uninteruptable DC Power Supply Diagram   Backup Voltage and Power My network's gear uses various voltages: 12 Volts, 24 Volts, and 5 Volts.  So my overall goal is to have three voltages available for my various devices.  Sadly, the computer UPS market doesn't seem to want to deliver any devices to satisfy these needs... at least nothing affordable. But there is another huge industry that had this need, and that's the world of small business security.  And in particular, small apartment buildings that use electronic locks!  They don't want their buildings to be inaccessibly locked during a power outage, and so they use battery backups all th...

I often find it challenging to find specific Xfinity web pages used manage my Internet service. Here is the list of URLs that I am often struggling to find. Status, and Remotely restarting the modem      https://www.xfinity.com/support/status      Under "Internet", there should be a Cable Modem entry that says "Connected" and which has a Restart button.   Monthly Data Usage      https://customer.xfinity.com/#/devices#usage Also in JSON form at       https://customer.xfinity.com/apis/csp/account/me/services/internet/usage?filter=internet Hotspot List      https://customer.xfinity.com/#/settings/security/hotspot-devices Speed Testing This is my go-to speed testing service.  It provides a lot of great information.  It isn't a Comcast service, but it does a great job.      https://speed.cloudflare.com/       

As of this writing in the US and Canada, there are exactly 238 "Daylight Saving Time" days per year, and 127 "Standard Time" days per year.  We change our local clocks twice a year, in March and November. Very early or very late sunrises mess up a lot of people, as does the clock change. Many people in the US would like to both eliminate the clock changes and shift their time zone. People in the areas that have very late sunrises effectively want to shift the timezone boundary to the west.  This includes states like Michigan, Indiana, and Georgia, which are inadvertently in the Eastern Time Zone.  Instead, many people in these states would greatly prefer to follow the clock of the Central time zone. Similarly, many people in the areas that have very early sunrises would want to shift their timezone boundry to the east.  This includes the Northeast, which could move to the Atlantic time zone. Many states have already voted for these changes, but it takes an act of co...

I have a couple Brother HL-3170CDW color laser printers.  They're pretty old, circa 2015.  One is working fine, and the other is dead with a laser-related issue and is being slowly scavenged for parts. In any case, these machines have firmware that needs to be periodically updated.  There are two chucks of firmware for this printer: Main Firmware Version and Sub1 Firmware Version . As of this writing, on 10-March-2024, the firmware versions are as follows: MAIN FIRMWARE is at 1.32  SUB1 FIRMWARE is at 1.07 A printer's version information can be seen by looking at http://{printer_ip}/general/information.html Updating the Firmware Unfortunately, the HL-3170CDW printer does not offer a built-in UI to deal with firmware updates.  Instead, the Brother Firmware Update Tool must be used to keep the printer's firmware up to date.  The tool can be found at The Brother HL3170cdw web page.   It can be found under Windows and Macintosh downloads. Note that the u...

I frequently read about how Puma-based DOCSIS modems have severe latency problems.  Back in 2016, a user on DSL Reports who states that he is an "EE" that "designs electronics" did an analysis and claimed that he found very frequent and repeatable ~250 ms latency spikes due to his modem's Puma chipset.  (It is important to note that this person did not claim to have any professional or academic credentials in networking.) The data he published - a repeatable and consistent 250 ms latency - seems so bizarre that I found it almost impossible to fathom that his findings were typical behavior, or that ISPs would certify such poorly behaving modems. Later in 2016, an article was published that amplified his claims and his story took off as "the experience of everyone with a Puma-based modem". By April 2017, another article was published in The Register stating that someone was pursuing a class action lawsuit against Arris related to Puma-based modems. [T...