Skip to main content

Transitioning to Comcast Now!

I've transitioned to Comcast NOW, a lower speed, lower cost alternative.  The kids have grown up and moved out.  I'm spending much more of my time traveling.  I don't need the high speeds at home like I used to.

This transition promises to save me $240 dollars a year versus my old "discounted" plan.

Xfinity to Comcast Now transitioning process

  1. I went to the Xfinity store and told them I was cancelling two weeks out.  This isn't weird - people move all the time, so they do have a process for cancelling at a future ("move-out") date.
  2. Later the same day, I was able to go to the Comcast website and order the NOW modem for the new service. Note that Comcast didn't let me do this until I had a future cancel order in place.
  3.  Three days later, the modem arrived via FedEx.
  4. The cancel date came and went - Xfinity seems to have a grace period, so the old modem wasn't unceremoniously yanked out of service at midnight.  This made the transition smooth.
  5.  Then I powered up the new modem, plugged in my router, and 10 minutes later with no action on my part, it just worked.  It was easier than I expected!

Regarding the Modem

  • My Comcast NOW modem is the Arris/Comcast "XB3".  It is a combo device (modem + wifi router).  
  • The modem can be reached and configured at http://10.0.0.1/ 
  • I have an existing LAN router, so I put the XB3 modem in bridge mode.  Bridge mode disables routing at the modem so that my existing home router can do that job. Bridge mode also disables the device's WiFi, all but one switch port, DHCP, etc.  If you think about what a home router does, this makes perfect sense.
  • The XB3 modem is a bit power-hungry.  Even in Bridge mode, it is eating about 14 watts 24x365.  That's about double the power consumption of my good old SB6190, and will cost me about $20 more to power every year. 
  • I wall mounted the XB3 on my network backboard.  It isn't designed for wall mounting, but with a little zip tie ingenuity it is easy. More on this soon.

Performance

I got the cheapo plan, which purports to be "100/20".  My Speed Test reports about 117 Mb/s  download and 23 Mb/s upload, with an unloaded latency of 19.5 ms.   In practical terms, my download is now 1/5th the performance it was, and my upload speed has been cut in half.  Big deal?   Is such a rollback in service speed worth a ~ $220 per year savings? Time will tell! 

 

 

 

Labels:

Popular posts from this blog

Fixing a SodaStream Jet, part 1: Disassembly Guide

I've had my SodaStream Jet for years, and once in a while something has gone wrong. Disassembly is the first step to repair.  Start with this article to see how to disassemble the SodaStream, and then once you have that down, scroll through my other articles to see how I repaired specfic SodaStream problems. SodaStream Jet Disassembly Guide Tools Required Flat head screwdriver Phillips head screwdriver 1. Remove the Carbonator.  Duh. 2. Remove the black panel lever The front big black tilt lever needs to be removed first. Removing this panel is tricky, but it isn't impossible. Looking up at the bottom of the black panel, there are two tabs, one on the left and one on the right. These tabs fully secure the panel in place. The trick is to use a flat-head screwdriver under the plastic to gently lever the tabs out of the way.  Note in the pictures how I approach these tabs with my screwdriver.  I usually release the left side first, and then I release ...
Read more

Fixing a SodaStream Jet, Repair #2 - Broken Fill Button

My Soda Stream Jet's fill button broke, which means I can not longer carbonate water by pressing the pushbutton. This caused all sorts of grief in my household. Here is how I managed to repair my Jet to give it another 10 years of life (hopefully). First, a look at the button The fill button on the top of the SodaStream is actually a simple lever. Pressing down on the button moves a pin that does the actual work of pressing open the Carbonator's valve. Unfortunately, the axis point is fairly thin and can see a lot of stress. That's where my Soda Stream button cracked. [ I think the usage tip here is "don't over-press the button like a gorilla, it doesn't do anything but put high stress on the button."] Cracked levering point of the button The Pesky Lever Retaining Pin The Fix It was pretty easy for me to replace the button: Take off the back of the Soda Stream and remove the carbonator. Push out the the button lever's steel retaining pin. This takes qu...
Read more

Sodastream Carbonator Leakage, Usage, and Weight

SodaStream 60L "Carbonator" CO2 cylinders have a specific weight when empty, plus about 410 or so grams for the CO2 they should have when they're "full".  A little while ago I went to buy a replacement Carbonator from my local hardware store. The dealer pulled a new Carbonator out of the box and sensed it was lighter than usual.  He put the "light" Carbonator in the "empty" pile and sold me a different one.  At that moment I concluded that it would be smart of me to weigh both new and empty SodaStream carbonators.  Here are the results. Weighing a SodaStream Carbonator - for both Science and Consumer Protection.       The dealer told me that sometimes the carbonators leak after they leave the SodaStream filling facility.  That means there could be an opportunity for customers like me to get ripped off! The SodaStream cylinders I buy claim to have a net product weight of 410 grams - and that means that a full Soda Stream Carbonator shou...
Read more

Installing the Eve Smart MotionBlind Upgrade with my Large Roller Shade

I have a large window in the front of my house and a roller shade was just the right window treatment for it.  But I also wanted to automate it. My MotionBlind Upgrade kit and my new roller shade I looked around to buy something that I was comfortable with, but simple non-automated roller blinds can be expensive, especially when they're larger than 6 ft x 6 ft.   This is disappointing, as a roller blind is just a tube with a small amount of synthetic cloth but can easily cost hundreds of dollars. Plus, since I wanted a smarthome blind, we're talking $500 or more from the "service oriented shops". I'm a tech guy.  I think can do better. After thinking about DIY and creative solutions, I decided to try out the Eve MotionBlinds Upgrade (MBU) kit.  This kit transforms an ordinary roller blind into a smart blind.  The MotionBlinds mechanism is basically consists of a small motor and battery in a long metal tube.  This motor tube slides into a roller blind ...
Read more

Adding a Water Flood Sensor to my Vista-20p alarm system

My Honeywell Vista 20p alarm system is fairly comprehensive, but I want one more feature: an alarm that lets me know when my sump pump isn't working properly. Here is how I added one for about $8 in special parts.   I'm afraid of a flood in my finished basement. I'm fortunate - my basement sump pump system is already redundant, with two independent pumps and two outflow pipes. The primary pump kicks in when the water level reaches 6 inches, and if that doesn't work, then the backup pump kicks in when the water level reaches 7 inches.  The backup pump should never kick in unless the primary pump is having a problem pumping.   But there is a problem with this setup: I might never know if my primary pump has failed, leaving me with no redundancy.  I want to be informed when I have one (or god forbid, two) pump failures. My goal is to have my Vista 20p alert me when the sump's water level is ever beyond the point where my primary pump should have kicked in, alertin...
Read more

Robust Installation of an HDHomeRun Networked TV Tuner. 64 OTA channels!

I added an HDHomerun (HDHR) over-the-air (OTA) streaming box to my home network, bringing over-the-air broadcast TV to my computers, phones and tablets.  The HDHR is a big upgrade from my previous setup: using a simple "window mount" antenna directly connected to my TV. A TV-attached antenna is good for watching some TV for free, but the HDHR offers so much more flexibility. Figure 0: HDHomeRun on my basement wall   My original OTA TV setup was haphazard at best. It was finicky, ugly, and hard for other people at home to use. I would actually tape my antenna to a window whenever I wanted to watch OTA TV. Plus, it only worked on my TV and not with my other devices. I wanted a cleaner and more modern OTA setup. After looking at possibilities, I developed two goals: (1) bring my OTA TV into the modern Internet-connected era, and (2) set it up in a reliable and pretty way so that other family members wouldn't have to fool around with the antenna or anything else.  With that,...
Read more

Other Posts

Show more