Skip to main content

Excellent DD-WRT Router for Me: Netgear WNDR3400 / N600

My WiFi performance was suffering, and so I decided to do something about it and upgrade my router.

When I say my WiFi performance was suffering, I really mean it:  I live in a large high-rise apartment building and there are 100+ WiFi access points visible from my home office.  All of the contentious traffic was severely curtailing my WiFi reliability.  I was lucky to get 1 Mbit/second throughput.  Sometimes I was lucky to stay connected even with my WiFi router in the same room.

I decided it was time to go for 5 GHz, which is a WiFi band which is used less frequently and which has a tougher time traversing walls.  And of course I wanted DD-WRT support.  The set of features I was looking for included:
  • Trouble-free DD-WRT support
  • 5 GHz 802.11n Support
  • Simultaneous dual band capability
  • Inexpensive.  Maybe even cheap.  For me this means under $50.  Under $35 is even better!
It sounds like an easy task to bring all this together: All of this technology has been around for over 5 years.  But nothing is as easy as it seems until you know exactly what to do.  Finding the best router for DD-WRT takes a lot of qualitative analysis.

Finding the DD-WRT best router: The WNDR3400 (also known as the N600)

After doing some research I found that some Netgear WNDR3400's can be very inexpensive and  support DD-WRT.  This router is also known as the Netgear N600.  In particular, DD-WRT is compatible with version 1 of the '3400.

In shopping around, I found this refurbished Netgear WNDR3400 routers for sale on Amazon for well under $35.  I figured the price was right, and if I managed to get a version 2+ I would assess it on its own merits.  (Update: For the real bargain WNDR3400s, make sure you check out the "new and used".)

Well, I ended up getting a version 2, which was not DD-WRT compatible [it is now, see below - lj].   I fired it up anyway, and it performed wonderfully in terms of reliability - it sped up my home WiFi incredibly.  I decided to keep the WNDR3400v2 using the principle that "super-fast working WiFi without DD-WRT" is better than "awful WiFi".

Version 2 Label

After a month or so of operation I remained happy - the N600 was working great.  A family member gave me a call and needed a new router, so I decided to buy another WNDR-3400 for her.  After all, it provided great performance and at an incredible price.   But when I got my next refurb, it was a Version 1!  The gamble paid off!


Version 1 label
Interestingly, the physical details of the v1 is a quite a bit different than the v2.  It sure does look the same, but the port layouts and LEDs are different.  Both versions purport to have identical function, but clearly they are completely different devices on the inside.  Anyhow, with a version 1 model in-hand I was ready and excited to install DD-WRT!
The N600: v1 on top, v2 on bottom. They must be very different on the inside.

Choosing the right DD-WRT firmware for the WNDR3400

The hardest part about DD-WRT is knowing what firmware to install.  I have a list of what I look for:
  • A version that has the features I need
    • 2.4 & 5 GHz WiFi
    • Working Ethernet
    • Working SSH
    • Working IPTables
  • No Heartbleed-ing
  • Reliable
  • Known not to brick or otherwise destroy the router
Sounds easy, right?  Never!  The DD-WRT community has an incredible amount of informal documentation, and parsing it all is a substantial job in of itself.  DD-WRT is a hobby, not a product, and so there are a lot of tradeoffs, broken features, gotchas, and potential brick-makers.

After some significant research, I chose a build that seemed to have the right mix of reliability and working features that wouldn't brick my WNDR3400.  To be precise, I used exactly this build:

ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2013/05-27-2013-r21676/broadcom_K26/dd-wrt.v24-21676_NEWD-2_K2.6_mini-WNDR3400.chk

 Installing DD-WRT on the WNDR3400

Now, before you try to do this, just remember that this worked perfectly for me but it may not work for you at all. So please proceed at your own risk. After all, some people do things like drive their car to the repair shop because the oil light is flashing red.

Once I downloaded the firmware build noted above, I installed the firmware using the following procedure:
  • Turned off my computer's wifi
  • Connected my computer to the router's port #1 via an ethernet cable.
  • Restarted the WNDR3400 via its power switch
  • Fired up Firefox on my computer
  • Entered the Netgear firmware update page on http://192.168.1.1/
  • Used the Netgear's firmware update page to install the firmware.
  • Waited about 5 minutes
After installation (again, about 5 minutes), the WNDR-3400 rebooted and the DD-WRT login page appeared.  After that, I used the DD-WRT configuration pages to set up the access point exactly how I like:
  • Set the local password
  • Set the SSID and WPA2 password
  • Configured DDNS
  • Configured SSH
  • Configured port forwarding, static DNS entries, etc.
After configuring all this I did a speed test.    Performance was as awesome - just as good as a hard-wired connection to my cable modem.

Now my WiFi is fast, reliable, and has DD-WRT.  My old v2 router will go to my family, who can use it without DD-WRT.

My WNDR3400 v1 in action with DD-WRT!
Issues with r21676

The only impactful bug I have found so far is related to SSHd.  Despite leaving the private sshd port  22 and putting the public sshd port on 10002, SSHd was publicly listening on 22 and 10002.  This is behavior is different than other DD-WRT builds I have used. 

My simple work-around was to have sshd only available on 10003.  Interestingly, I didn't immediately see this via iptables or netstat.  It took a portscan for me to reveal this.

 So far I find the WNDR3400 very reliable.  It has been up and running for more than a month without any known issues.

Installing DD-WRT on a WNDR3400v2

I have read about some people being successful installing DD-WRT on a v2, but I was unwilling to try - the evidence I saw out there wasn't that strong or compelling.  But if you try, please let me know the outcome in the comments.

Update 1: I was also able to install DD-WRT on a v2!  Yes, it is possible.  I haven't tried all features, but everything I use on a daily basis is working great.   See this post for details.

Update 2: Well, excitingly enough, I just bought a much more capable router that is both DD-WRT and OpenWRT compatible: The MikroTik hAP AC lite is a compact and powerful router right out of the box.  It has been rock-solid for people looking for inexpensive professional class hardware.

Popular posts from this blog

Fixing a SodaStream Jet, part 1: Disassembly Guide

I've had my SodaStream Jet for years, and once in a while something has gone wrong. Disassembly is the first step to repair.  Start with this article to see how to disassemble the SodaStream, and then once you have that down, scroll through my other articles to see how I repaired specfic SodaStream problems. SodaStream Jet Disassembly Guide Tools Required Flat head screwdriver Phillips head screwdriver 1. Remove the Carbonator.  Duh. 2. Remove the black panel lever The front big black tilt lever needs to be removed first. Removing this panel is tricky, but it isn't impossible. Looking up at the bottom of the black panel, there are two tabs, one on the left and one on the right. These tabs fully secure the panel in place. The trick is to use a flat-head screwdriver under the plastic to gently lever the tabs out of the way.  Note in the pictures how I approach these tabs with my screwdriver.  I usually release the left side first, and then I release the right

Fixing my Wahl 9918 Groomsman Beard and Mustache Trimmer

Not everyone would bother repairing a $25 beard trimmer, but why not fix something for under $5 instead of spending another $25? My  Wahl 9918 Groomsman Beard and Mustache Trimmer  has admirably performed its beauty duty for many years, but the time came when the battery just wasn't holding a charge any more.  Most people would just put the trimmer in the trash and buy a new one, but I figured I could repair my otherwise excellent Wahl and save some money. In fact, even high priced trimmer and rotary shaver brands, like Norelco and Remington, can be easily repaired using a process similar to the one I used to fix my Wahl.  Read on to find out how. I opened up the Wahl by popping off the black plastic faceplate with a tiny flathead screwdriver, which revealed two screws.  By removing the two screws I was able to easily open up the unit, revealing the guts of the device. Backplate off, Revealing the screws The internals are rather simple: a motor, a simple circuit boar

Sodastream Carbonator Leakage, Usage, and Weight

SodaStream 60L "Carbonator" CO2 cylinders have a specific weight when empty, plus about 410 or so grams for the CO2 they should have when they're "full".  A little while ago I went to buy a replacement Carbonator from my local hardware store. The dealer pulled a new Carbonator out of the box and sensed it was lighter than usual.  He put the "light" Carbonator in the "empty" pile and sold me a different one.  At that moment I concluded that it would be smart of me to weigh both new and empty SodaStream carbonators.  Here are the results. Weighing a SodaStream Carbonator - for both Science and Consumer Protection.       The dealer told me that sometimes the carbonators leak after they leave the SodaStream filling facility.  That means there could be an opportunity for customers like me to get ripped off! The SodaStream cylinders I buy claim to have a net product weight of 410 grams - and that means that a full Soda Stream Carbonator shou

Fixing a SodaStream Jet, Repair #2 - Broken Fill Button

My Soda Stream Jet's fill button broke, which means I can not longer carbonate water by pressing the pushbutton. This caused all sorts of grief in my household. Here is how I managed to repair my Jet to give it another 10 years of life (hopefully). First, a look at the button The fill button on the top of the SodaStream is actually a simple lever. Pressing down on the button moves a pin that does the actual work of pressing open the Carbonator's valve. Unfortunately, the axis point is fairly thin and can see a lot of stress. That's where my Soda Stream button cracked. [ I think the usage tip here is "don't over-press the button like a gorilla, it doesn't do anything but put high stress on the button."] Cracked levering point of the button The Pesky Lever Retaining Pin The Fix It was pretty easy for me to replace the button: Take off the back of the Soda Stream and remove the carbonator. Push out the the button lever's steel retaining pin. This takes qu

Adding a Water Flood Sensor to my Vista-20p alarm system

My Honeywell Vista 20p alarm system is fairly comprehensive, but I want one more feature: an alarm that lets me know when my sump pump isn't working properly. Here is how I added one for about $8 in special parts.   I'm afraid of a flood in my finished basement. I'm fortunate - my basement sump pump system is already redundant, with two independent pumps and two outflow pipes. The primary pump kicks in when the water level reaches 6 inches, and if that doesn't work, then the backup pump kicks in when the water level reaches 7 inches.  The backup pump should never kick in unless the primary pump is having a problem pumping.   But there is a problem with this setup: I might never know if my primary pump has failed, leaving me with no redundancy.  I want to be informed when I have one (or god forbid, two) pump failures. My goal is to have my Vista 20p alert me when the sump's water level is ever beyond the point where my primary pump should have kicked in, alerting me

Robust Installation of an HDHomeRun Networked TV Tuner. 64 OTA channels!

I added an HDHomerun (HDHR) over-the-air (OTA) streaming box to my home network, bringing over-the-air broadcast TV to my computers, phones and tablets.  The HDHR is a big upgrade from my previous setup: using a simple "window mount" antenna directly connected to my TV. A TV-attached antenna is good for watching some TV for free, but the HDHR offers so much more flexibility. Figure 0: HDHomeRun on my basement wall   My original OTA TV setup was haphazard at best. It was finicky, ugly, and hard for other people at home to use. I would actually tape my antenna to a window whenever I wanted to watch OTA TV. Plus, it only worked on my TV and not with my other devices. I wanted a cleaner and more modern OTA setup. After looking at possibilities, I developed two goals: (1) bring my OTA TV into the modern Internet-connected era, and (2) set it up in a reliable and pretty way so that other family members wouldn't have to fool around with the antenna or anything else.  With that,

Other Posts

Show more