Skip to main content

Canon SD890 Review

My Canon PowerShot SD890IS Review

Wahoo! I just received my new
Canon PowerShot SD890IS. Here's my review of the new SD890IS.

Updated! (20-April-2008)!

I like taking good photos. And I hate lugging around big cameras and equipment. And so I concluded that I needed to buy myself an awesome point-n-shoot camera.

I often take pictures in difficult conditions, such as a museum where a flash camera is prohibited. Or a concert, where I can't use a flash, the lighting is low, and the people on stage are in motion. Or with the zoom cranked up and focused on a distant subject. Taking good photos in these conditions, with a small lens camera and without a tripod is a challenge at best.

In comes the SD890. I was particularly excited about the SD890 because it is pocketable, yet it has awesome specifications: Image stabilization; a 5x zoom lens, and 10 megapixel resolution. When I bought the camera, I imagined that these features would help me take much better pictures in these less-than-ideal conditions.
My SD890, just out of the box - Lookin' great.


I bought my SD890 IS from NewEgg for about $350 (in April, 2008) [I have no affiliation with NewEgg]. If you poke around the web, you may be able to find it for less - but I'm not comfortable with some of the very low cost camera retailers out there - I've heard too many horror stories from my friends. Note that the SD890 IS is known as the IXUS970 IS in Europe and perhaps other places. [I don't know how Canon ended up with two names for many of their camera products - it is confusing and annoying.]

Why I purchased this camera

I recently had the opportunity to try out various compact point & shoot digital cameras in a low-light situation. I was taking snaps for various people who were on stage, and so I had about 12 cameras at my disposal and no ability to use a flash. Most of the cameras were fairly new.

The camera that I had the best experience with was the Canon SD800 IS - which took the best photos of all the point-and-shoots, despite the demanding situation. So I went online to buy one - and I discovered that it (and its predecessors) were mostly out of stock.

One day later, Canon announced the SD890 IS. I decided to buy it based on the specifications, as it seemed like a new and improved version of the SD800 that I loved so much.


The Basics

The SD890 is a comfortable, small point and shoot. It is a little bigger than the SD400 series, but is still conformable in a shirt or jacket pocket. In particular, it is a bit thicker between the LCD and the lens - likely due to the SD890's 5x zoom lens.

The SD890 has that 5x zoom and stabilization - features that I think are now required for a great point-and-shoot.

The SD890 also has a decent-sized LCD on the back panel, along with a small optical viewfinder (that I will almost never use).

The SD890 comes with all the basic components that are included with most digital cameras:
  • A small (32 MB) SD memory card. Out of the gate, my SD890 IS reports that it can store roughly 11 photos on the stock card or 18 seconds of video. Upping the resolution will merely reduce the number of photos you can store on the stock card. You WILL want a bigger memory card. If you shop around, you'll find that 2 GB and larger SD memory cards quite inexpensive these days.
  • A lithium-ion battery pack. This battery is a bit thicker than those of other Canon Elph's that I've owned. It took about two hours to charge the battery for the first time.
  • A battery charger. Of course, it can work with a range of voltages, from 100v to 240v.
  • A USB cable. Happily, of standard design. Replacements are readily available at very low cost.
  • An A/V cable, with (mono) audio and composite video RCA connectors. It is not a standard design - it plugs into the camera's USB port. But I'm unlikely to use the video cable - composite is so old-school. So no big deal to me, it'll stay in the box.
  • Canon's Digital Camera Solutions CD-ROM disk. Man, they're up to version 33.0! I didn't install this software yet - for now, I'm using iPhoto, which works automatically with this camera.
  • A user's guide and a software guide, in various languages.
Some important included stuff: cables, battery, and a dinky SD memory card.

I wish that all camera manufacturers would include some kind of felt sleeve for their new cameras - but the Canon doesn't include one. Nor does any other manufacturer that I know of.

Computer Compatibility

If you have a somewhat modern computer (less than 7 years old or so), you should have no problems. The stock software is compatible with Windows 2000 on forward, and Mac OS X from 10.3 (Panther) and beyond.

The camera is also very usable without using Canon's stock software. iPhoto and Picasa work great with the SD890.

The biggest problem you might run into is related to the picture size.
10 Megapixels is getting up there. I was quite happy with my 5 megapixel camera - a 10 megapixel camera suggests that I'll be using up twice as much disk storage with photos.

Out of the box, the SD890 is set on "Fine" mode, resulting in photos that are typically 2.5 MB in size. Of course, I prefer Superfine mode, which improves a photo's quality at the expense of disk size. In general, it seems like the Superfine mode results in photo that are, on average, 7 MB big.

If you have an older computer, you might want to either manage you photo collection a bit better, or get a larger hard disk. Very high capacity external drives are available for roughly $100. (And don't forget to back up your photo collection!)

Taking pictures

... but how does it do in practice? That's a great question. I have only taken a couple pictures so far, but I've been surprised by the quality of those pictures - they feel great. But I still need to do some side-by-side comparisons before I come to any firm conclusions. I will be updating this page frequently as I experiment with this new camera. Feel free to use the "comment" option (below) if you have any specific questions for me.

It can't sit down straight with the lens fully extended.


Next Steps
Now I'm off to a photo-taking session - I'll report back here in the next day or two to update you with how well the SD890 performs!


Update, 2-April-2008!

So far it's pretty awesome! I've gave the SD890 a 2GB SD card, and put the camera in "super-fine" mode. Resulting photos are roughtly 3-to-6 MB big, meaning that I can get about 454 photos per 2 GB card (that is according to the camera.)

I took some indoor shots (without flash). The camera did particularly well in these conditions. Although it told me that there was a call for the flash, I found that I could take great pictures with only a steady hand. Undoubtably the stabilization helped out. Of all the indoor shots I took, only one was truly bad... and that was because my subject was goofing around - certainly something that the camera cannot compensate around.

I also took some outdoor shots. Again, the camera performed well. I was in bright sun, but my subjects were in motion and I was using the 5x zoom - not always the easiest situation with a small camera. Again, the photos looked great.

Balloons, of course, taken with the SD890.

I also took some marco shots. There was a little distortion around the edges, but it was more than adequate for my basic needs. I could get the lens to focus at about 1.5 inches away from the subject (here, my SD400 rear panel)

Full frame macro shot example.

What I don't like (so far)

I don't like the rear LCD. It performs well, and it is a decent size with good brightness. But it almost stands out from the rear surface of the camera. That means when I lay the camera on a table, flat on it's back, it seems likely that the LCD will get scratched. YUK. I think I'll have to be very careful to avoid scratching up the rear LCD display. Perhaps a vinyl glass protector would work well here.

Popular posts from this blog

Fixing a SodaStream Jet, part 1: Disassembly Guide

I've had my SodaStream Jet for years, and once in a while something has gone wrong. Disassembly is the first step to repair.  Start with this article to see how to disassemble the SodaStream, and then once you have that down, scroll through my other articles to see how I repaired specfic SodaStream problems. SodaStream Jet Disassembly Guide Tools Required Flat head screwdriver Phillips head screwdriver 1. Remove the Carbonator.  Duh. 2. Remove the black panel lever The front big black tilt lever needs to be removed first. Removing this panel is tricky, but it isn't impossible. Looking up at the bottom of the black panel, there are two tabs, one on the left and one on the right. These tabs fully secure the panel in place. The trick is to use a flat-head screwdriver under the plastic to gently lever the tabs out of the way.  Note in the pictures how I approach these tabs with my screwdriver.  I usually release the left side first, and then I release the right

Fixing my Wahl 9918 Groomsman Beard and Mustache Trimmer

Not everyone would bother repairing a $25 beard trimmer, but why not fix something for under $5 instead of spending another $25? My  Wahl 9918 Groomsman Beard and Mustache Trimmer  has admirably performed its beauty duty for many years, but the time came when the battery just wasn't holding a charge any more.  Most people would just put the trimmer in the trash and buy a new one, but I figured I could repair my otherwise excellent Wahl and save some money. In fact, even high priced trimmer and rotary shaver brands, like Norelco and Remington, can be easily repaired using a process similar to the one I used to fix my Wahl.  Read on to find out how. I opened up the Wahl by popping off the black plastic faceplate with a tiny flathead screwdriver, which revealed two screws.  By removing the two screws I was able to easily open up the unit, revealing the guts of the device. Backplate off, Revealing the screws The internals are rather simple: a motor, a simple circuit boar

Fixing a SodaStream Jet, Repair #2 - Broken Fill Button

My Soda Stream Jet's fill button broke, which means I can not longer carbonate water by pressing the pushbutton. This caused all sorts of grief in my household. Here is how I managed to repair my Jet to give it another 10 years of life (hopefully). First, a look at the button The fill button on the top of the SodaStream is actually a simple lever. Pressing down on the button moves a pin that does the actual work of pressing open the Carbonator's valve. Unfortunately, the axis point is fairly thin and can see a lot of stress. That's where my Soda Stream button cracked. [ I think the usage tip here is "don't over-press the button like a gorilla, it doesn't do anything but put high stress on the button."] Cracked levering point of the button The Pesky Lever Retaining Pin The Fix It was pretty easy for me to replace the button: Take off the back of the Soda Stream and remove the carbonator. Push out the the button lever's steel retaining pin. This takes qu

Sodastream Carbonator Leakage, Usage, and Weight

SodaStream 60L "Carbonator" CO2 cylinders have a specific weight when empty, plus about 410 or so grams for the CO2 they should have when they're "full".  A little while ago I went to buy a replacement Carbonator from my local hardware store. The dealer pulled a new Carbonator out of the box and sensed it was lighter than usual.  He put the "light" Carbonator in the "empty" pile and sold me a different one.  At that moment I concluded that it would be smart of me to weigh both new and empty SodaStream carbonators.  Here are the results. Weighing a SodaStream Carbonator - for both Science and Consumer Protection.       The dealer told me that sometimes the carbonators leak after they leave the SodaStream filling facility.  That means there could be an opportunity for customers like me to get ripped off! The SodaStream cylinders I buy claim to have a net product weight of 410 grams - and that means that a full Soda Stream Carbonator shou

The Yamaha DD-65 and YDD-60 Digital Drums

Almost everyone I know who is into drums should get their hands on the Yamaha DD65 . It's a low cost, fun little kit that you can throw in your car to jam with your buddies. It's a lot easier than throwing your gear in your Subaru. The DD-65, also known as the YDD-60. Eight pads in a pretty package. I've owned the older, venerable DD-55 for about five years. The DD-55 is the ancestor of the newer DD-65, and is an evolution of the DD-50, which was first released some time in the mid 1990s. I just put my DD-55 on this light snare drum stand it's ready for some jamming. The classic DD-55. Seven pads of rockin' fun, since about 2001. Yes, everyone will tell you that the DD-55 isn't actually a real drum kit. No kidding. However, a skilled drummer can get some great sound out of this little box, and you can definitely keep the band together with it. Plus, it's perfect for apartment living.

Adding a Water Flood Sensor to my Vista-20p alarm system

My Honeywell Vista 20p alarm system is fairly comprehensive, but I want one more feature: an alarm that lets me know when my sump pump isn't working properly. Here is how I added one for about $8 in special parts.   I'm afraid of a flood in my finished basement. I'm fortunate - my basement sump pump system is already redundant, with two independent pumps and two outflow pipes. The primary pump kicks in when the water level reaches 6 inches, and if that doesn't work, then the backup pump kicks in when the water level reaches 7 inches.  The backup pump should never kick in unless the primary pump is having a problem pumping.   But there is a problem with this setup: I might never know if my primary pump has failed, leaving me with no redundancy.  I want to be informed when I have one (or god forbid, two) pump failures. My goal is to have my Vista 20p alert me when the sump's water level is ever beyond the point where my primary pump should have kicked in, alerting me

Other Posts

Show more